Feb 23
Filed under:
Amplifier,
Digital
6ave.com has the Alpine PDX Series 2.1 Channel Power Density Digital Amplifier for $197.77 - 6% off coupon code “BONUSBUY” = $185.90 with free shipping.
This product is sold at AbtElectronics.com for $394.95; Crutchfield.com for $399.99.
Product description from 6ave.com:
The PDX-2.150 2-channel amplifier supplies 150 watts of full-range power to each channel, plenty of power for the most demanding component speaker systems or most subs. Beefy internal components and clever engineering keep the power output strong and the noise low for superb fidelity and control. Adjustable frequency filters tailor the amp’s output to your specific system.
PDX Amplifier Design
Class-D amplifiers boast higher efficiency, produce much less heat, and draw less current than traditional Class-AB amps. The PDX series is Alpine’s totally new super-efficient power density design of full range class-D amps. They combine MOSFET power supplies, MOSFET final outputs, and a thermal management processor, along with a 4-Layer Glass Epoxy PC Board to create a high-end sound quality without the bulky heat sinks required by most amps with this much power.
STAR Topology
Alpine’s unique STAR (Signal Transit for Ac!
curate R
esponse) Circuit PCB design provides a single common ground for all amp sub-blocks, preventing ground interference and minimizing internal noise.
Terminal Layout
For wiring convenience all the inputs and outputs on the amp are on one side.
Verification Certificate
The amplifier comes with a certificate that lists the RMS power output of the individual amplifier. It also lists the model number, serial number, test date, and the test conditions (14.4 volts, 4 ohms).
Speaker Connecters
The PDX series amps use a new Speaker Quick Connect plug to attach the speaker wires to the amp. Bare speaker wire, up to 8 gauge, is held in place by a set screw, the Quick Connect plug then plugs into the amp. Like an RCA jack, the Quick Connect plug uses a center positive layout, so it fits two ways and both maintain correct polarity.
Stack Amps
Because the PDX series design generates so little heat, up to three amps can be stacked and bolted together
. All three amps in the series, PDX-2.150, PDX-4.150, and PDX-1.1000 share the same footprint, so they can be stacked together.
LED
The top mounted LED Power/Status indicator glows blue when operating normally and red when one of the protection circuits engages.
Features Included: - PDX Amplifier Design
- STAR Topology
- Terminal Layout
- Verification Certificate: Speaker Connecters
- Stack Amps
- LED
Product link.
Feb 09
Filed under:
Amplifier,
Sony,
Speaker
Walmart.com has the Xovision 3” In Dash DVD Receiver + Sony Speakers + DP Audio Amplifier Installation Kit for $180.00 with free in-store pickup.
Product description from Walmart.com:
The XO Vision 3″ Wide Screen In-Dash DVD Receiver boasts excellent compatibility with DVD, MP4, AVI, VCD, MP3, WMA and JPG file formats. It’s also equipped with an AM/FM radio with 30 preset stations, memory a
nd auto scan. Plus, the XO Vision 3″ Wide Screen In-Dash DVD Receiver provides audio playback from any MP3 player, iPod or iPhone.
XO Vision 3″ Wide Screen In-Dash DVD Receiver:
3″ DVD Receiver with a fully detachable face16:9 Wide Screen DisplayBuilt-In DVD Player Compatible with DVD, MP4, AVI, VCD, MP3, WMA, JPG, CD and MoreAM/FM Radio with 30 Presets stations, Memory and Auto ScanBuilt-In USB Input on Front PanelBackup Camera Input3 RCA pre-outs including Front, Rear and Subwoofer outPiano Black FinishFront AUX Input for MP3 ConnectionHigh Power 4 x 75W AmpZpodLink (Included) Provides Audio Playback from any MP3 Player, iPod or iPhone (does not control the iPod)Digital Album: Jpeg Image browser, slide show, Zoom, Pan functionRemote Control Included
Bundle includes:
Xovision 3″ Wide Screen In-Dash DVD Receiver With USB & AV Inputs, XO1930
Sony speakers
DP Audio 250 Watts x 2 Car Amplifier, DA500.2
D
P Audio 1000-Watt Amplifier Installation Kit
Product link.
Recent Comments